Shims and Light Pressings

High quality shims from Stephens Gaskets

Shims and Light Pressings Manufacturing Experts & Bespoke Shims and Light Pressings Specialists
Call 0121 544 5808 Today

Bespoke Manufacturing

l

Instant Quote Service

Worldwide Delivery

R

Various Gauges/Thicknesses

Bespoke Manufacturing

l

Instant Quote Service

Worldwide Delivery

R

Various Gauges/Thicknesses

Close Tolerance Materials

Shims and light pressings are available in Steel, Stainless, Carbon Steel, Aluminium, Copper, Brass, Silicon Iron, Laminates etc.

Shims & light pressings are manufactured to our customer’s specific requirements to British, American & European Standards.

Very close tolerance thickness materials from 0.0005″ / 0.0127mm to 0.125″ / 3mm.

We have the ability to manufacture small batches within our low volume hand press section to millions off with our comprehensive range of power presses.

Shims and light pressings at Stephens Gaskets

We can accommodate most requirements within our 4000 standard press tools. However if we do not have a standard to fit your requirements, our sister company fully owned by Stephens Gaskets will manufacture the press tools for you.

For more information or to discuss your requirements please contact us.

High Quality Production

Because Stephens Gaskets have been manufacturing shims, washers, and gaskets since the company was founded in 1947, we have accrued a reputation for friendly, swift, high quality production across all areas of manufacture – and this is no different when it comes to Shims and Light Pressings.

British, American & European Standards

All our Shims and Light Pressings are produced in high grade, close tolerance materials to ensure quality and consistency across the board. As per your individual requirements, we can manufacture Shims and Light Pressings in a variety of materials, to British, American, and European Standards. These materials include close tolerance steel, stainless steel, carbon steel, aluminium, copper, brass, silicon, iron, plastics, and laminate, among many others.

Bespoke Pressed Hardware

Working to your specific requirements, we have the capability to manufacture batches of Shims and Light Pressings at any reasonable volume, from small batches – made in our low-volume hand pressed section – to large batches of several million – using our large range of comprehensive power presses. At Stephens Gaskets, we pride ourselves on quality and consistency, so you know that what you order is exactly what you will get, particularly when it comes to bespoke pressed hardware.

Manufacturing For All Industries

Your peace of mind is paramount, so our quality control and manufacturing processes have been honed to ensure that all our products are safe and will perform as expected while in use. Over the years, Stephens Gaskets has expanded our core range of products to suit a growing client base in almost every industry; subsequently, our dedicated staff can produce anything from exhaust gaskets and cylinder head gaskets to precision washers and spring steel washers, among many other high quality products.

Wide Range Of Products

Because of our wide range of products, we can accommodate almost any specification within our existing four-thousand standard press tools – and anything we can’t already produce, our sister company (fully owned by Stephens Gaskets) can produce the necessary press tools for you on specification.

No job is too big or too small for Stephens Gaskets!

Speak To Our Team Of Experts

If you would like more information about the range of Shims and Light Pressings available at Stephens Gaskets (or about any of our other high quality products, like shim washers then please don’t hesitate to get in touch with our friendly team. Whatever your industry or requirements, they are on hand to answer any questions you may have and share their expertise.

Close Tolerance Materials

Shims and light pressings are available in Steel, Stainless, Carbon Steel, Aluminium, Copper, Brass, Silicon Iron, Laminates etc.

Shims & light pressings are manufactured to our customer’s specific requirements to British, American & European Standards.

Very close tolerance thickness materials from 0.0005″ / 0.0127mm to 0.125″ / 3mm.

We have the ability to manufacture small batches within our low volume hand press section to millions off with our comprehensive range of power presses.

Shims and light pressings at Stephens Gaskets

We can accommodate most requirements within our 4000 standard press tools. However if we do not have a standard to fit your requirements, our sister company fully owned by Stephens Gaskets will manufacture the press tools for you.

For more information or to discuss your requirements please contact us.

High Quality Production

Because Stephens Gaskets have been manufacturing shims, washers, and gaskets since the company was founded in 1947, we have accrued a reputation for friendly, swift, high quality production across all areas of manufacture – and this is no different when it comes to Shims and Light Pressings.

British, American & European Standards

All our Shims and Light Pressings are produced in high grade, close tolerance materials to ensure quality and consistency across the board. As per your individual requirements, we can manufacture Shims and Light Pressings in a variety of materials, to British, American, and European Standards. These materials include close tolerance steel, stainless steel, carbon steel, aluminium, copper, brass, silicon, iron, plastics, and laminate, among many others.

Bespoke Pressed Hardware

Working to your specific requirements, we have the capability to manufacture batches of Shims and Light Pressings at any reasonable volume, from small batches – made in our low-volume hand pressed section – to large batches of several million – using our large range of comprehensive power presses. At Stephens Gaskets, we pride ourselves on quality and consistency, so you know that what you order is exactly what you will get, particularly when it comes to bespoke pressed hardware.

Manufacturing For All Industries

Your peace of mind is paramount, so our quality control and manufacturing processes have been honed to ensure that all our products are safe and will perform as expected while in use. Over the years, Stephens Gaskets has expanded our core range of products to suit a growing client base in almost every industry; subsequently, our dedicated staff can produce anything from exhaust gaskets and cylinder head gaskets to precision washers and spring steel washers, among many other high quality products.

Wide Range Of Products

Because of our wide range of products, we can accommodate almost any specification within our existing four-thousand standard press tools – and anything we can’t already produce, our sister company (fully owned by Stephens Gaskets) can produce the necessary press tools for you on specification.

No job is too big or too small for Stephens Gaskets!

Speak To Our Team Of Experts

If you would like more information about the range of Shims and Light Pressings available at Stephens Gaskets (or about any of our other high quality products, like shim washers then please don’t hesitate to get in touch with our friendly team. Whatever your industry or requirements, they are on hand to answer any questions you may have and share their expertise.

Cookie Control

Cookie control

We have placed cookies on your device to help make this website better.

I'm fine with this

We use cookies to give you the best online experience.

Please let us know if you agree to all of these cookies.

Some of the cookies we use are essential for the site to work.

We also use some non-essential cookies to collect information for making reports and to help us improve the site. The cookies collect information in an anonymous form.

To control third party cookies, you can also adjust your browser settings.

I'm fine with this
(One cookie will be set to store your preference)
(Ticking this sets a cookie to hide this popup if you then hit close. This will not store any personal information)
Information and Settings Cookie policy